
Fresno Auto Collision Shop That Helps You Plan the Repair Ahead
We repair collision damage, dents, cracked bumpers, faded paint and bent frames for drivers in Fresno, Clovis and nearby towns. You learn which parts are damaged, why, and what the repair involves before any work starts, so you can set a budget and pick a drop-off date that fits your week.
- I-CAR Gold certified
- Written line-item estimates
- Damage explained part by part
- Drop-off dates you choose
Auto Body Repair We Handle
Most of our work is collision repair: the panels, bumper covers, lamps and brackets that take the hit, plus the structure behind them. We also do dent repair, paint and refinishing, bumper repair and frame straightening, and we help you through the insurance claim when one is involved. Each service page explains what fails, how we fix it and what changes the cost.

Collision Repair
Structural and cosmetic repair after an accident, with a line-item estimate, hidden damage found early, and a schedule you can plan your week around.

Dent Repair
Paintless dent removal when the paint is intact, and metal finishing with refinish when it is not, scheduled at a time that suits you.
Paint and Refinishing
Color-matched basecoat and new clear coat for faded, peeling or scraped panels, scheduled before small paint failures turn into rust.
Bumper Repair
Plastic welding, tab repair, cover refinishing and sensor checks for front and rear bumpers, with a clear repair-or-replace answer before work starts.
Frame Straightening
Unibody and frame damage measured against factory dimensions, pulled back on a bench and checked again before the car leaves.
Insurance Claims
We document the damage, write a line-item estimate and work with your insurer on supplements so you know the costs and the timeline before the repair begins.
How a Repair Runs at Our Shop
Most jobs follow the same five steps. Knowing them up front helps you plan around the days your car is with us.
- 1
Talk it through by phone
Tell us what happened and what you see. We explain what to look for, whether the car seems safe to drive and what to bring when you come in.
- 2
Inspection and estimate
You bring your vehicle to the shop. We inspect it, remove trim where needed, take photos and write a line-item estimate.
- 3
Parts and scheduling
We order parts and set a drop-off date that works with your schedule and the parts arrival, so your car is not sitting idle waiting on a back-ordered bracket.
- 4
Repair and refinish
We straighten or replace panels, restore corrosion protection and seam sealer, then prime, paint and clear coat in the booth. Sensor calibration follows if the repair calls for it.
- 5
Final check and pickup
We check panel gaps, lamp function and paint match in daylight, then walk you through what was done.
Drivers We Serve Around Fresno
Our shop is in Fresno, and drivers bring their cars to us from across the city, including Old Fig Garden, Mayfair, Tarpey Village and Sunnyside. We also see customers from Clovis, Sanger, Fowler and Selma, and from Bonadelle Ranchos and Madera Ranchos to the north.
- Fresno
- Old Fig Garden
- Mayfair
- Tarpey Village
- Clovis
- Sunnyside
- Fowler
- Bonadelle Ranchos
- Madera Ranchos
- Sanger
- Selma
All repairs happen at our shop, so plan on bringing your vehicle in for the inspection and again on the drop-off date we set together.
What Moves the Cost of a Repair
Two dents that look alike can cost very different amounts to fix. The price comes from what is damaged underneath, the parts your vehicle uses and how much refinishing it takes to match. Here is what we weigh when we write the estimate.
Every estimate lists parts, labor and refinishing as separate lines so you can see where the cost comes from. If we find more damage once the repair is underway, we show you and explain the change before we continue.
- Hidden damage
- Bumper reinforcement bars, energy absorbers, radiator supports and mounting tabs often bend or crack behind an intact-looking cover. Finding them at the estimate keeps the total from climbing halfway through the repair.
- Part type and availability
- Factory parts, aftermarket parts and reconditioned parts differ in fit and cost. Some makes have long lead times, which affects when the repair can start.
- Panel material
- Aluminum and high-strength steel need specific tools and repair procedures, and some high-strength parts can only be replaced, not straightened.
- Paint and blending
- Tri-coat pearls and metallic finishes take more steps to match. We often blend color into the next panel so the repair does not show in sunlight, and that adds time.
- Sensor calibration
- Vehicles with driver-assist systems may need radar or camera calibration after the repair, depending on what was removed or replaced.
- Frame and structure
- If measurements show the unibody is out of spec, frame straightening adds setup time on the bench and a final measurement to confirm the result.
Why Drivers Plan Their Repairs With Us
Small damage rarely stays small. A cracked bumper cover lets water and grit reach the absorber and brackets, and a chip in the clear coat becomes peeling paint. We help you catch it early and schedule it on your terms.
I-CAR Gold certified training
Our shop holds I-CAR Gold certification, which means our technicians keep current on repair methods for modern steel, aluminum and plastic parts. That matters on newer vehicles, where the wrong weld or heat setting can weaken a part designed to absorb crash energy.
We look behind the panel
A dented quarter panel can hide a bent inner structure or a cracked sensor mount. We remove trim and bumper covers where needed during the estimate so the plan reflects the real damage, not just what shows from the outside.
Repair or replace, explained
Some panels are worth straightening and refinishing. Others are stretched, kinked or too thin to repair well. We tell you which is which and why, so you are not paying for a new part you do not need or keeping one that will not hold.
A plan you can schedule
If the car is safe to drive, you do not have to drop it off the same day. We give you the scope, the parts lead time and a realistic shop time, and you pick when to bring it in.
Sensors and safety systems checked
Radar units, cameras and parking sensors often sit behind bumper covers and windshields. When a repair disturbs them, we note the calibration the manufacturer calls for so the system works as designed when you drive away.

About Our Shop
Auto Collision Shop Fresno is a body shop for drivers who would rather know what they are getting into before the car goes on the lift. We fix collision damage, dents, bumpers, paint and frames, and we spend time explaining causes: why a clear coat is peeling, why a door no longer lines up, why a bumper cover cracked at the mounting tab.
Long, hot Fresno summers are hard on paint, and UV breaks down clear coat faster on horizontal panels like the hood and roof. We point out early wear like this during an estimate so you can decide whether to deal with it now or plan for it later.
- Certifications
- I-CAR Gold certified
Questions Drivers Ask Us
- Can I keep driving my car before the repair?
- Often yes, if the lights work, the hood and doors latch, nothing is rubbing a tire and no warning lights are on. A loose bumper cover or a cracked lamp can still let water in, so we may suggest a temporary fix. If anything affects steering, brakes or visibility, we will tell you to hold off.
- How do I get an estimate?
- Start with a phone call so we can hear what happened and set a time for you to bring the car in. The estimate itself is written at the shop after we inspect the vehicle, because photos rarely show what is behind the panels.
- Do I have to use the shop my insurance company suggests?
- No. In California you can choose where your vehicle is repaired. We can explain how the insurance claim process works with our shop, including how supplements are handled if more damage turns up, though your adjuster makes the coverage decisions.
- Should I file a claim or pay out of pocket?
- That depends on your deductible, the size of the repair and your policy. Having a line-item estimate in hand first helps you compare the numbers before deciding. We can walk you through the estimate, and your insurer can answer how a claim affects your policy.
- Is it worth fixing small damage now instead of waiting?
- Usually, yes. A chip that reaches bare metal starts to rust, and a cracked bumper cover lets grit and water work on the brackets behind it. Fixing it early tends to keep the repair smaller, and you can schedule it when it suits you.
- How long will my car be in the shop?
- It depends on the parts, the amount of structural work and the refinishing. A bumper cover repair is much shorter than a job that needs frame measuring and several replaced panels. We give you a realistic estimate of shop time once parts are confirmed.
- Will the new paint match the rest of my car?
- We mix color to your vehicle's paint code, then adjust with spray-out cards because factory paint shifts with age and sun exposure. On many colors we blend into the adjacent panel so the transition is not visible.
Plan the Repair Before It Becomes Urgent
A short call tells you what the damage likely involves, whether it can wait and when to bring your car in for a written estimate.