
ServicesCollision Repair
Collision Repair in Fresno
After an accident, the damage you can see is rarely all of it. We take your car apart, find what the impact reached behind the panels, and give you a written plan with parts, labor and timing before the repair starts.
What collision repair covers
Collision repair puts a vehicle back to its pre-accident shape, strength and function. On a modern unibody car, the outer panels are only the skin. Behind a front bumper cover sit a foam or plastic energy absorber, a steel or aluminum reinforcement bar, the radiator core support and often a radar sensor for adaptive cruise. A low-speed hit can crack a headlamp mounting tab or shift the core support a few millimeters, and that is enough to throw off panel gaps or sensor aim.
We plan the work so it does not surprise you halfway through. That means a teardown before parts are ordered, a parts list you can read, and a realistic date for drop-off and pickup. If you want to line up a rental, a ride or time off work, you will know what to arrange before your car comes in.

What the repair includes
- 01
Pre-repair diagnostic scan
We scan the vehicle's computer modules before work begins. Airbag, sensor and lighting faults often show up here before anyone sees a cracked bracket.
- 02
Teardown and damage mapping
We remove the bumper cover, lamps and inner liners to inspect the absorber, reinforcement bar, mounting points and core support. Everything we find goes on the estimate with photos, so you see the reason for each line.
- 03
Panel repair or replacement
Some panels can be pulled and reshaped. Others, like a creased quarter panel near a body line or a kinked door intrusion beam, are safer to replace. We tell you which and why.
- 04
Structural measurement
When the impact may have reached the unibody, we measure reference points against factory dimensions. If anything is out of spec, that work moves to our Frame Straightening service.
- 05
Refinish and color match
New and repaired panels are primed, color-matched and blended into adjacent panels so the repair does not show as a different shade in direct sun. Our Paint and Refinishing page explains that process in detail.
- 06
Post-repair scan and calibration check
After reassembly we scan again and confirm that cameras and radar units that were removed or disturbed are aimed correctly.
Questions about Collision Repair?
Call(559) 617-8627Signs the damage goes deeper than the panel
Uneven panel gaps
If the gap between the hood and fender, or a door and the quarter panel, is wider on one side, something behind it has shifted.
Doors or trunk that bind
A door that now needs a hard push to latch usually points to a moved hinge pillar or striker area, not a bad latch.
Warning lights after the hit
Airbag, forward collision or lane-keep warnings that appear after a minor bump often mean a sensor or its bracket was knocked out of position.
Pulling or off-center steering
A wheel struck at the curb or in the impact can bend a tie rod or control arm. The car may drive fine around town and wander at highway speed.
Fluid under the front end
Green or pink coolant on the ground after a front hit suggests a cracked radiator or condenser. In Fresno summer heat, that is worth having looked at before a long drive.
How a collision repair runs at our shop
- 1
Phone conversation
You tell us what happened, what the car is, and whether an insurance claim is open. We set a time for you to bring it in for the estimate.
- 2
Inspection and written estimate
We look the car over, scan it and write a line-item estimate. If hidden damage is likely, we say so up front instead of letting it appear later as a surprise.
- 3
Teardown and parts order
Once you approve the work, we disassemble the damaged area, confirm the parts list and order everything at once. You get a drop-off date that accounts for parts arrival, so your car is not sitting half apart.
- 4
Repair, refinish and reassembly
Structural work comes first, then body panels, then paint, then reassembly with new clips and fasteners where the originals are single-use.
- 5
Final checks and pickup
We road-test, run a final scan, check gaps and lights, and walk you through what was done before you take your car home.
What moves the cost of collision repair
No two accidents load a vehicle the same way, so we price from the teardown, not a guess. These are the factors that change the number most. Knowing them early helps you budget and decide how to handle the insurance claim.
- How far the impact traveled
- Damage that stops at the bumper cover and absorber is a smaller job than damage that reaches the core support, apron or rails.
- Parts choice
- Factory parts, quality aftermarket parts and repaired originals differ in cost and fit. We explain the trade-off for each part on your estimate.
- Sensors and calibration
- Vehicles with radar, cameras or parking sensors near the damage need those units removed, reinstalled and checked, which adds labor.
- Paint and blending
- Tri-coat and pearl colors take more material and more steps to match, and adjacent panels often need blending.
- Material type
- Aluminum panels and high-strength steel need specific repair methods and sometimes replacement where mild steel could be reshaped.
Collision repair questions
Can I get an estimate before I file an insurance claim?
Yes. Many drivers want to know the scope of the repair first so they can decide whether to file or pay out of pocket. We write the estimate the same way either way. Our Insurance Claims page covers what happens if you do file.
Why might the estimate change after teardown?
Some damage is only visible once the bumper cover, lamps and liners are off. If the teardown finds a bent reinforcement bar or cracked bracket, we photograph it and talk to you before adding it. Nothing gets added without your approval.
How long will my car be at the shop?
It depends on the parts and the depth of the damage. We order parts after teardown and schedule around their arrival, so you get a realistic date you can plan a rental or ride around.
Is it a collision repair or just dent repair?
If the paint is intact and nothing behind the panel is damaged, our Dent Repair service may be enough. Cracked paint, damaged mounting points or anything structural calls for collision repair. We will tell you which one your car needs.
Do you handle bumper damage on its own?
Yes. A scuffed or cracked bumper cover with no damage behind it is usually handled through our Bumper Repair service, which is a smaller job.
Plan your collision repair before it plans your week
Tell us about the damage and we will set a time for the estimate. You will leave with a parts list, a clear scope and a drop-off date you can work around.